Converts your board to electric in minutes. The R Kit is for the mad-lads. This beast pumps out serious acceleration with its two battery, two motor drive train. Did we mention it's fast as hell?!
Cyber Monday Special: includes free complete upgrade with your choice of board!
The power to climb any hill and outrun bikers! Our dual-motor dual-battery setup can also be split into 2 Solos to share with a friend (with the addition of another remote and baseplate). Comes with everything needed to mount to your board (you will need board + trucks to fit)
Power (R): 1680 W MAX
Rider Weight Limit: Tested to 240 lbs / 110 kg
Drive System: FOC with Regenerative Braking
Throttle: Remote Control with user-tunable parameters
Wheel Diameter: 82.5 mm
Contact Patch: 58 mm
Input: 100 V – 240 V | 50 Hz / 60 Hz
Working Temperature: -10 °C to 40 °C
Charging Temperature: 0 °C to 40 °C
CCharge Time (2 A): 2 Hours and 30 minutes
Charge Time (3 A): 1 Hour and 50 minutes
In The Box
x1 Dual Baseplate
x1 Charger (2 amp)
x1 Remote Control
x1 Skate Tool & Assembly Kit
x2 Standard wheels (with bearings)
Voltage: 36 V nominal | 42 V max.
Capacity: 2.5 Ah (per battery, 2 included connected in parallel for 5 Ah)
Charging Time: 80 minutes (each / using 2 A charger)
Connectivity: CAN bus to other Batteries and Cores
Enclosure material: Fiber-reinforced nylon (tough as nails!)
USB Type-C port for charging accessories
Sealed to IP65 spec.
Our wheels and motors are mild offset 82.5 mm x 64 mm which means you must account for wheel bite (wheels rubbing against the deck) on your setup. Wheel bite stems from a combination of deck shape, truck style, and wheels. We have made it work on 90% of boards with the included spacers but some experimenting will be needed on your end to get a perfect fit.
The motor can be mounted either on the toe or heel side. Installation requires no weird tools or modifications and is fully reversible.
Mounting the carbon baseplate is done with wedge spacers that mildly reduce rear truck responsiveness (providing a more stable ride).
An additional optional bolt can be used to secure the carbon baseplate to the deck, this means you need to drill into your deck. This bolt is totally optional and we seldom use it in our test setups, but the options is there for you.